Burris XRT II 1-8x24mm Scope w/ Ballistic Circle Dot Reticle and LT104 Mount

 
$1,125.00
SKU: 510-024

Burris XRT II 1-8x24mm Scope w/ Ballistic Circle Dot Reticle and LT104 Mount

Designed for serious rifle shooters—both tactical and competitive
Provides true 1x magnification for optimal situational awareness and accurate, both-eyes-open shooting
8x magnification creates excellent target acquisition at longer ranges
The riflescope has dimensionally-matched precision adjustment knobs and Zero Click Stop technology.
High-performance optics offer Hi-Lume® multi-coated lenses. The lenses optimize target resolution, contrast, and low-light performance.
All hand-fitted internal assemblies are triple spring tensioned for absolute shockproofing, even under severe recoil. They are vibration resistant, even on extended vehicular patrols.
The riflescope outdelivers its modest price tag. And it’s protected forever by the Burris Forever Warranty™ .


Specifications
Item Number: 201018
Magnification: 1-8x
Reticle: Ballistic Circle Dot
Knob Style: MAD System, Low single turn, zero click stop, extra low included in box
Objective Lens Diameter: 34 mm
Clear Objective Lens Diameter: 24 mm
Ocular Lens Diameter: 44.25
Focal Plane: FFP
Main Tube Size: 34 mm
Field of View: 105-12.45 ft
Eye Relief: 3.50-4.00 in
Exit Pupil: 12-3 mm
Click Value: 1/10 mil
Elevation Adjustment, Total Capability: 30Mil/103 MOA
Example: 50 MOA is roughly 25 MOA from center.
Windage Adjustment: 30Mil/103 MOA
Example: 50 MOA is roughly 25 MOA in any direction from center.
Length: 10.75 in
Weight: 24.4 oz
Illumination Control: Rotary dial; intermediate battery-saver stops
Illumination Settings: 11 brightness settings
Battery: CR2032

About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.

Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).

Post new Review

Please leave a star rating for your review.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Web page addresses and e-mail addresses turn into links automatically.

CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.