LaRue Tactical Scope Mount QD LT807
link: https://www.larue.com/products/larue-tactical-scope-mount-qd-lt807/
SKU: LT807
$399.99
LaRue Tactical Scope Mount QD LT807-34
The LT807 QD Scope Mount is available in 30 or 34mm rings. The height is set for
1.375" above the rail, for proper cheekweld (slightly lower than the LT111’s
1.535” height). Like the LT111, the LT807 will accommodate the US Optics T-Pal
with it's larger turret body. The generous 2.9" ring spacing accommodates large
turret blocks with ease.
The LT807 comes complete with spare mounting screws with wrench, QD adjustment
wrench, and Instructions.
LaRue Tactical Scope Mount QD LT807-34
The LT807 QD Scope Mount is available in 30 or 34mm rings. The height is set for 1.375" above the rail, for proper cheekweld (slightly lower than the LT111’s 1.535” height). Like the LT111, the LT807 will accommodate the US Optics T-Pal with it's larger turret body. The generous 2.9" ring spacing accommodates large turret blocks with ease.
The LT807 comes complete with spare mounting screws with wrench, QD adjustment wrench, and Instructions.
About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.
Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).