LaRue Tactical Upgrade LT271

4.9615384615385
ReviewsNew Review
 
$85.00
SKU: LT271

The LT271 provides QD functionality to Atlas Bipods (No Clamp models) and the Laser Devices DBAL series of lasers. It replaces the original mount in a few minutes.

Comes complete with replacement mounting hardware, QD adjustment wrench, vial of blue Locktite and Instructions.

NOTE: Not compatible with Steiner DBAL-D2

About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.

Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).

4278
5
38 out of 54 people found this helpful.
Reviewed by Anonymous 4 years ago
Purchased for an Atlas bipod as well. The extras in my box = awesomeness! The high quality mount is reason enough but with such customer service, I am sold on LaRue products.
Login to rate this review.
3500
5
29 out of 52 people found this helpful.
Reviewed by superairdave 5 years ago
Absolutely perfect fit for my Atlas bipod. Great job LaRue!!!
Login to rate this review.
6219
5
10 out of 16 people found this helpful.
Reviewed by Anonymous 3 years ago
Awesome piece! Made my Atlas Bi-Pod that much better. Another home run from LaRue!
Login to rate this review.
25147
5
1 out of 1 people found this helpful.
Reviewed by Anonymous 21 weeks ago
I put this mount on my Steiner DBAL-D2. They can fit together by shaving an edge down. I'm sure the warranty goes out the window but it still mounts on and off while repeating zero at 100 yards. Great mount as always.
Login to rate this review.
15518
5
1 out of 1 people found this helpful.
Reviewed by liveapps 1 year ago
I bought this to hold a Steiner DBAL to a quad rail and it does the job perfectly, much better than the stock mount that comes with the DBAL. The LaRue LT271 is strong, crisp, stable and precise....everything I was looking for in a mount.
Login to rate this review.
13701
4
1 out of 1 people found this helpful.
Reviewed by Golden-Arm 1 year ago
i bought my lt27 to mount the bt10-nc to my brand new predatar 5.56. the mount shipped quickly, and had a nice assortment of lt swag inside. (thanks mark) the mount looked great, no visible flaws, and had a solid, quality feel to it. i quickly mounted the bt10 to it, no issues at all. the little bottle of loctite was a nice touch! after mounting the bi-pod, i went to mount it to the predatar. it lined up quickly, but wouldn't lock down, in any position on the forward lower rail. i reversed the mount, positioning the release lever on the opposite side. still nothing, i mean, not even close. i broke out the little adjusting wrench ( another nice touch!) and started adjusting. after a full turn and a half of loosening, i was able to finally get the clamp to lock onto the rail, but it was still a lot of effort. some more loosening, and it finally got to a point that didn't require both thumbs to lock it. the mount is solid, and i'm extremely pleased with it. it marred the mount a bit, but it's not visible, under the mount itself. overall, a great item, that needed a bit of adjusting before it was perfect. we'll see you at ar15.com
Login to rate this review.
9468
5
1 out of 1 people found this helpful.
Reviewed by Anonymous 2 years ago
5/5 Works great for a DBAL. Will buy more of them for any other DBAL's without hesitation.
Login to rate this review.
6465
5
8 out of 17 people found this helpful.
Reviewed by Anonymous 3 years ago
Perfect fit for the Atlas bipod. I will be buying another shortly for another bipod.
Login to rate this review.
3794
5
27 out of 55 people found this helpful.
Reviewed by spencergray 4 years ago
Bought for my Atlas bipod as well! Works great!
Login to rate this review.
6706
5
6 out of 15 people found this helpful.
Reviewed by Anonymous 3 years ago
Used these to mount a couple DBAL I2's. Rock solid, (as usual). Long time LaRue customer. Recommend to all my colleagues/friends.
Login to rate this review.
29082
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 8 weeks ago
Purchased to mount on a Duplin bipod for F-Class matches. Fit and finish is perfect along with everything needed to mount and secure. Placed order online and was shipped out the same day and at my door in three days. As always the additional items in the box are always appreciated and show the dedication LaRue puts forth with every customer. The new bumper sticker "Extremely Deplorable" made me laugh. Between being Extremely Rightwing and Extremely Deplorable makes me proud that I've always been extremely deployable too. God Bless the USA.
Login to rate this review.
25902
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 18 weeks ago
Outstanding mount for the Atlas bipod. Best on the market, period. There is no better. Fit, finish, and function are perfect. Outstanding service from LaRue as well. Thank you for the extra gear! Best folks out there to do business. Thank you LaRue Tactical!
Login to rate this review.
20220
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 36 weeks ago
everything you would expect from Larue. Perfect, right out of the box!
Login to rate this review.
17312
5
0 out of 0 people found this helpful.
Reviewed by markbaran 48 weeks ago
Excellent upgrade for the Steiner DBAL series of lasers. A great addition to my group of LaRue mounts.
Login to rate this review.
14781
5
0 out of 0 people found this helpful.
Reviewed by Marine0311 1 year ago
Whenever I have the opportunity to switch out or start out with a sight mount it is always a LaRue Mount. I used this mount for my Steiner DBAL A3 and it is Rock solid just like every other mount LaRue has to offer. I was surprised that the stock Steiner mount was Sub Par for the price of the unit but even if it was better I would still have put a LaRue on it. LaRue is second to none when it comes to quality and performance and they always put lots of cool extra stuff in the Box. The Dillo Dust Rocks! Thanks LaRue! God Bless America!
Login to rate this review.
14117
5
0 out of 0 people found this helpful.
Reviewed by Lukemc01 1 year ago
As others have mentioned, this is a well designed and built mount. The finish is the best quality and I am extremely impressed with the simple yet elegant design of the QD system. I'm using it with an Atlas bipod but the mount will work with any 17s compatible units. As always, the customer service is top notch and the extras were a hit around the office when I received the package.
Login to rate this review.
13657
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
Great quality product, worked perfectly with my Atlas bipod. I live in TX and received it the next day.
Login to rate this review.
13618
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
Replaced the adm mount on my atlas bipod with this. Great improvement. The adm mount was clamping unevenly on the rail, causing damage and the bipod loosened up after shooting. Adjustment was cumbersome. Larue mount is rock solid and much faster to adjust/install.
Login to rate this review.
13504
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
I also bought this for my Atlas bipod. Installation was a snap. Fits perfectly. LaRue has become my go to for high quality accessories, gear and mods. Thanks for the Dillos and Dust. My wife loves those. I distributed the bumper stickers and catalogs at Gunsite last visit.
Login to rate this review.
13382
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
Bought the Atlas bipod with the LaRue QD mount from Larue. Love the mount. Makes it very easy to take on and off. Great quality. Have bought other mounts from Larue and quality is always there.
Login to rate this review.
12774
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
Fast shipping, box full of swag as usual. The part uses a good quality metal, tensioning mechanism seems well designed. Fits my accessory picatinny rail snugly and goes on easily. Mounts to my bipod as best as can be expected. No complaints.
Login to rate this review.
12667
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
Bought this to replace the cheap mount on my DBAL-I2 (which broke, a measly 2 screws held the clamp together). Fit's snug and far more sturdy than the original! I am Larue for Life! Thanks guys for making the best mounts in the industry.
Login to rate this review.
12578
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
Very well machined and very snug fit. Bought this to replace ADM mount from atlas bipod. I will sel that one and put it towards another Larue mount for a scope. Very impressed with the amount of goodies in my package. Some of the best items ever received.
Login to rate this review.
11280
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
Best option for the ATLAS bipod! Took the SPIGOT (BOAT ANCHOR) mount off, and installed with supplied loctite. Easy day.
Login to rate this review.
10640
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
LT271 mount the is best, have them on my Atlas bi-pods and they are perfect. Easy to adjust tension and you get excellent extras with your mount.
Login to rate this review.
10154
5
0 out of 0 people found this helpful.
Reviewed by tkisker 2 years ago
I bought this, like many others, for my Atlas bipod. Installation was a snap. Fits as perfectly as others have noted. I will buy from LaRue again in the future. Thanks for all the extras in the box. Have already put the opener to good use!!
Login to rate this review.

Post new Review

Please leave a star rating for your review.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Web page addresses and e-mail addresses turn into links automatically.

CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.