QD Pivot Mount-Short for Aimpoint or Hensoldt Magnifier, LT755

 
$162.00
SKU: LT755-30S
QD Pivot Mount-Short for Aimpoint or Hensoldt Magnifier

This magnifier mount will properly align with the following LaRue mounts … LT659NV, LT660, and LT751.

NOTE: The T1/H1 in the LT660/LT751 will be slightly offset vertically to the magnifier, but will operate properly by adjusting the two Allen screws which allow the user to center the red dot of the Aimpoint sight when viewed through the 3XMag.

About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.

Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).

816
5
134 out of 228 people found this helpful.
Reviewed by bangfx 5 years ago
when i saw this on the web i knew i had to have it for my aimpoint great peice.
Login to rate this review.
4200
5
122 out of 219 people found this helpful.
Reviewed by Shonuff22 4 years ago
This mount is top notch. There is no play in it what so ever. You get what u pay for and I will have this mount for the rest of my life. It is constructed that well. Thanks Larue! U guys rock!
Login to rate this review.
3264
5
116 out of 214 people found this helpful.
Reviewed by Mattkes 5 years ago
After searching for a quality flip to side for a while I finally came across the LT755. So far it's the purchase of the year!!! There are so many pieces of garbage out there that people are trying to pass off as a good FTS mount. This is the best one that I've seen without a doubt. It's stable and durable and sits perfectly behind my eotech XPS 2-0 when both are mounted on the same rail. I am so happy I chose to go with larue and I plan on doing more business with them in the future. This company has quality products and customer satisfaction as its backbone. You will see that the second you open the box. Very pleased, thanks again larue
Login to rate this review.
6851
5
54 out of 91 people found this helpful.
Reviewed by Anonymous 3 years ago
Pure quality. It truly is a thing of beauty. Flawless operation, rock-solid, and better that I expected. I've heard good things about LaRue Tactical, and not I can vouch for them. Buy it. You will not be disappointed.
Login to rate this review.
3417
5
93 out of 172 people found this helpful.
Reviewed by Anonymous 5 years ago
Got this mount yesterday and mounted it today. I went with the VFZ style not only to save $25.00, but with the Flip to Side pivot action, I have no need to remove it in a hurry. It moves out with a firm action and stays out. Very fine quality, I can see how they warranty it forever. And the customer service pre purchase was great! Thanks JP!
Login to rate this review.
7345
5
53 out of 94 people found this helpful.
Reviewed by Anonymous 3 years ago
After wasting my money on one of the $40.00 chinese garbage FTS mounts on amazon, I knew it was time to buy American and get the real deal. Worth every penny. I just wish I hadn't wasted the $40 before I bought Larue. This thing is rock solid in both positions, rock solid on the rail..no slop in any aspect. I would not consider another brand for any scope mount from here on out. I'm running a Primary Arms 6x behind an Eotech and it lines up perfectly. These mounts make for one kick ass hog hunting set up. Buy it
Login to rate this review.
7004
5
46 out of 84 people found this helpful.
Reviewed by Anonymous 3 years ago
As always a great product. Well made, functions perfectly and terrific customer service.
Login to rate this review.
5563
5
79 out of 156 people found this helpful.
Reviewed by Anonymous 3 years ago
Purchased this with VFZ mount to hold a magnifier behind the Aimpoint PRO. This thing is SOLID and lines up nicely. LaRue products are top notch. Shipping was extremely fast and included in the package was a bottle opener, jar of Texas dry rub, a hat, 2 bumper stickers and 3 copies of the US Constitution. It was like a never ending goodie bag. Thanks for everything.
Login to rate this review.
20369
5
1 out of 1 people found this helpful.
Reviewed by Anonymous 32 weeks ago
Thank you, this mount is perfect height with eho tech 516.And your customer service is #1.I am a customer for life Philip C.
Login to rate this review.
17402
5
1 out of 1 people found this helpful.
Reviewed by Anonymous 44 weeks ago
I originally ordered this mount in October but it was out of stock. But LaRue sent me one as soon as it was in stock. It was well worth the wait. The machining is second to none. The mount is very sturdy with no movement in either position. I mounted it behind their lt751 mount for an aimpoint. The magnifier sits a little high but I knew this when I order it and the adjustment screws on the magnifier has it lined up perfectly. I only order LaRue mounts for their excellent quality and great customer service. They even sent some extras! Thank LaRue for everything!
Login to rate this review.
14625
4
1 out of 1 people found this helpful.
Reviewed by Anonymous 1 year ago
I used this with my DD mount and Aimpoint T2 for absolute co-witness. Even though I used the short mount it still did not line up perfectly. I added the spacer on the DD mount for lower 1/3 and now it's fine. So beware if you get the short mount. Other than that the quality is great
Login to rate this review.
6506
5
43 out of 86 people found this helpful.
Reviewed by Anonymous 3 years ago
well made, did what it was supposed to do, wish it swung further out of the way.
Login to rate this review.
982
5
81 out of 163 people found this helpful.
Reviewed by whiskey-tango 5 years ago
Just got my LT755-30S in the mail today and it lines up perfectly with the Aimpoint PRO. Great quality. I understand why everyone speaks so highly of Larue products now. When you open your box you'll know what I'm talkin about.
Login to rate this review.
7374
5
40 out of 83 people found this helpful.
Reviewed by Anonymous 3 years ago
Absolutely awesome, this thing blows the samson quick flip mount out of the water and lines up perfectly with my AimPoint Pro unlike the samson quick flip mount which does not and its from the great folks from Larue in Texas of course need I say more. Thanks Larue Tactical, I will always do business with you guys and thanks for all the free stuff too, there are not too many companies like Larue Tactical anymore and that is sad. 2ARKBA MOLON LABE!
Login to rate this review.
7566
5
6 out of 16 people found this helpful.
Reviewed by Anonymous 3 years ago
I purchased this mount (short) for my Aimpoint 3X magnifier in conjunction with an Aimpoint PRO in the factory mount and spacer. The magnifier lines up perfectly! The QD mount is rock solid and functions flawlessly. Those of you looking for a pivot mount should definitely consider this one. It is worth every penny. I also appreciate LaRue Tactical for sending me some freebies with my order. I received the Dillo Beverage Entry Tool, a bottle of Dillo Dust spice rub for grilling, three pocket sized copies of the US Constitution, two bumper stickers (God Bless Our Snipers and Extremely Rightwing), and a catalog. I was kind of hoping for the LaRue Girl With Gun poster, but beggars can't be choosers.
Login to rate this review.
7268
5
29 out of 64 people found this helpful.
Reviewed by Anonymous 3 years ago
I've looked at several different mounts. Even tried a few....no slop, play and positive lock into place in either position. This is by far the best mount for a flip to side mount for your magnifier. Perfect co witness with my Eo 512 Using Vortex glass. Back up irons don't get in the way. Wish I got this sooner.
Login to rate this review.
6555
5
35 out of 76 people found this helpful.
Reviewed by Anonymous 3 years ago
The VERY BEST mount for swing out magnifier. short version gets it none behind aimpoint patrol (PRO)--lower 1/3 witness, and eotech transverse w/o qd latch--absolute co-witness. It's off a hair horizontally with sights but you don't notice unless your looking at the alignment. not sure what you would use the high mount for...better call'em before you get that one. expensive but WORTH EVERY PENNY. construction is great, wish everything was this well made. on the fense??? GET IT!!! Love the Dillo and the Rub :)
Login to rate this review.
6575
5
31 out of 73 people found this helpful.
Reviewed by Anonymous 3 years ago
Ever see a bad review on any Larue product? I haven't, and probably never will. There's a reason for that. All LaRue products are top notch! This LT755 mount is no different. Solidly built, locks up tight in both positions, fit and finish is outstanding, and it's easy to manipulate with one hand. It works perfectly with my Burris AR Tripler 3x magnifier. Using the LaRue LT751 micro mount for the Aimpoint T1 RDS (or H1), the magnifier will sit just a tad high, but it doesn't cause any issues. You can still see through the sight just fine with no shadowing effect at all. Would I recommend this product, or any LaRue product to a friend? Hell yes! Pay the money for a LaRue product and you'll have a quality piece of equipment that will last a lifetime, and probably your grandkid's lifetime as well. Carry on.
Login to rate this review.
4347
5
88 out of 192 people found this helpful.
Reviewed by Anonymous 4 years ago
I put this mount on my duty rifle and the quality is amazing. Yes it is a bit pricey, but I know I will only have to buy it once. Well worth the money.
Login to rate this review.
3503
5
89 out of 204 people found this helpful.
Reviewed by trent22290 5 years ago
I bought this mount for my vortex vmx3 3x magnifier, behind my vortex strikefire, and eotech exps it is absolutely perfect! The best mount I think ive ever seen. Great quality, very fast shipping! First product I have purchased from Larue, and I am very satisfied! Will definitely be buying more from them. You absolutely cannot go wrong with Larue mount. Thank Larue Tactical!
Login to rate this review.
6847
5
46 out of 124 people found this helpful.
Reviewed by Anonymous 3 years ago
Didn't mount up as close as I would like with a Comp M4s, but the height is virtually perfect. The brightness knob hits the flip to side mount if you want it close to touching. I'm very happy with my purchase regardless.
Login to rate this review.
29654
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 weeks ago
Great product! Very sturdy and well built. This works perfect with my Aimpoint 3x magnifier behind my Aimpoint PRO. I would recommend this product to anybody. Also the customer service at Larue is phenomenal. Very knowledgeable quick responses. They also sent me some extra goodies for no reason. 5 out of 5 armadillos.
Login to rate this review.
28934
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 5 weeks ago
I had just ordered a Burris ar qd pivot mount and thought I would be content. I saw several videos of the LT755 and realized that it was the tactical mount that I needed to complete my patrol rifle. I mounted an Aimpoint 3x-c magnifier behind an Aimpoint Pro which is sitting on a factory mount. The LT755 aligned perfectly. I highly recommend this if quality and functionality are a must. Thanks LaRue!!!
Login to rate this review.
28848
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 5 weeks ago
Quality is superb as expected with LaRue mounts. Used it on my Aimpoint 3x magnifier paired with an Aimpoint Pro. Customer Service pointed me in the right direction for which version of this to get based on my needs. Thank you!
Login to rate this review.
25701
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 15 weeks ago
Awesome mount, high quality. Everything one needs to mount if not ordering the lever mount. Being left handed, I have to push to engage/disengage. That's the only issue that it's not able to be reversed and operated exactly the same with either hand. You need to leave a small gap between the two devices. Easily accomplished... LaRue could develop another revenue stream by creating dust caps for the Aimpoint 3X-C since they do not make such a device.
Login to rate this review.
24872
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 18 weeks ago
Thanks Larue. Everything was perfect and mount was even better than advertised. All the goodies y'all sent were fabulous and I'll do business with you every time I can going forward. You are great.
Login to rate this review.
24019
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 20 weeks ago
Love this mount. Easy to flip out of way and easy to remove altogether. Feels solid in both positions too.
Login to rate this review.
21738
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 28 weeks ago
I just put this on my rifle behind the Aimpoint PRO which is sitting in the standard ratcheting mount that the Aimpoint pro comes in. I have the Aimpoint 3x-C magnifier in the Larue short mount and it lines up perfectly. I was able to mount the sight and magnifier so that there is only about 1/32 of inch between the two when I have the rear clear cover flipped down covering the back of the red dot. The mount is very study with almost no wobble both in the locked position behind the sight and when you have it locked off to the side. They also include a wrench to put your magnifier into the mount and a wrench to adjust the quick detach leaver that goes onto your picatinny rail. There is a long production lead time on these mounts that they don't specify on the website when you place your order, It took 2 months for me to receive my mount from the time I placed my order. I don't know if it is always that long but just FYI.
Login to rate this review.
21302
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 29 weeks ago
Used this on my Aimpoint 3x magnifier and it worked perfectly. It happened to be the correct height I needed for my red dot. Packaged very well with extra goodies too!
Login to rate this review.
21299
5
0 out of 0 people found this helpful.
Reviewed by GSPKurt 29 weeks ago
I purchased this to mount an Aimpoint 3XC magnifier behind an Aimpoint PRO with stock mount and it lines up perfectly. This mount looks to be bomb proof! I have never regretted buying LaRue gear, no one else compares. No one.
Login to rate this review.
13416
5
0 out of 0 people found this helpful.
Reviewed by Riggs9 1 year ago
Very high quality . . . Works great... ! Thanks for the extras.
Login to rate this review.
13350
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
The most durable mount I have ever used. Perfect alignment with the Aimpoint Pro. Very satisfied!!
Login to rate this review.
12635
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 1 year ago
By far the best mount for your Aimpoint. Don't buy the cheap mounts trying to save a few bucks, remember how much you Aimpost cost?
Login to rate this review.
12142
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
This will be rather short.... This is a fantastic mount! Then again, if you are looking here you probably have already seen the universal acclaim LaRue mounts receive. The accolades are well deserved. The mount is absolutely rock solid, with impeccable workmanship. I can give this a 100% recommendation. The folks at LaRue know their craft, and are quite helpful if you call them. Two enthusiastic thumbs up!
Login to rate this review.
11876
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
I like my Aimpoint magnification module but not the twist off mount. This is a much better design. I no longer have to drop an expensive optic in my pocket when not in use. VERY solidly made. Excellent design and construction.
Login to rate this review.
10618
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
I don't write review typically but this thing is awesome. Great build quality a solid product. Larue it's self is top notch.
Login to rate this review.
10508
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
I received my LT755-30S mount very promptly. out of the package i say there was no wiggle, steady metal, and a solid/positive retention for the pivot. Ive ran it on some courses and I've found no accidental "swing" into position. it takes a firm, pull rearward (about a 1/8 inch) and a pull toward the non-firing hand. installation takes a few minutes (tops) and LaRue's rock solid mount is a better then the typical screw threading you'd see in other mounts.
Login to rate this review.
10382
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
Amazing mount. Attention to detail is in every product these guys make. Thanks for ALL y'all do for our country and God Bless America! Oh yeah, & thanks for all the swag!
Login to rate this review.
10303
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
ABSOLUTELY money well spent! The LT755 is strong, steady, no play at all, very well finished, it installs, pivots, locks with ease, and lines up with my Aimpoint PRO perfectly. Don't bother looking anywhere else - this mount will last longer than my AR, I'm betting.
Login to rate this review.
10276
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
Awesome mount. Definitely worth the money over the other ones out there. I called customer service and told them what I had on my rifle and they were very knowledgeable and helpful. Ordered the right item and I can tell it is quality. You can tell this is made of quality material. I will definitely order from them in the future. thanks for a great product.
Login to rate this review.
10131
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
I bought another brand pivot mount and was told it would work with my setup, that guy did not know what he was talking about. I emailed LaRue Tactical to verify which QD Pivot Mount would work properly on my AR-15. LaRue emailed me back same day with the part number and I ordered it. A few days later I received the part and some extra goodies in the box. I mounted my AimPoint 3X MAG to it and put it behind my AimPoint PRO, now I had perfect center-line alignment. I really appreciate the customer service and the quality of the mount and just wanted to say "Thanks LaRue Tactical"!
Login to rate this review.
9992
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
Received mount and installed an Aimpoint 3X on it. Put mount and 3x behind my Aimpoint Pro with factory Aimpoint Pro mount. The LaRue/Aimpoint 3X combination lines up perfectly with the Pro on my Stag 2T rail. Great quality mount, good fit and no adjustment was needed for attachment to rail. Good QC at the factory. Looking forward to some range time.
Login to rate this review.
9586
5
0 out of 0 people found this helpful.
Reviewed by pdcecil 2 years ago
This LT755-30S QD converted a lower end 3x magnifier into a correctly functioning, reliable and repeatable optical accessory. Perfect absolute co-witness with with an "F" marked FSB for my Aimpoint Pro using the Aimpoint supplied mount.The QD is elegant in its design simplicity, has world class as manufactured quality, delivers 100% utility of function. This is American made product designed and manufactured as it should be. Works every time and built to last. Head and shoulders above any other mount I have had/unwisely spent money to purchase. Heck, the goodies LaRue includes (thanks for the Dillo Dust!...Man do I miss the 'Q in Austin!) are worth the price of admission! Add to this a company that cares about our freedoms and veterans enough to include copies of the U.S. Constitution with the delivered product has my business for as long as I am vertical and breathing.
Login to rate this review.
9076
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
Very well constructed! Holds solid to my rail flush up to my BUIS. Holds on to my AIMPOINT 3x Magnifier. No movement of/or loose parts. Locking lever is precise with tightening nut. Ridiculously easy to use for such a strong accessory. Will definitely be looking into other LaRue products!
Login to rate this review.
8891
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 2 years ago
Exactly as expected, based on rave reviews everywhere. Lines up correctly with my Comp M3 on Aimpoint mount. My only regret is that I didn't order sooner, thinking there might be another option - should have bitten the bullet and bought the right part immediately. Service was outstanding, by both email and phone. Fast shipment, and goodies included. What's not to like?
Login to rate this review.
8688
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 3 years ago
Absolutely rock-solid! I'm actually using it as a mount for my actual Aimpoint PRO scope!! I need the capability of flipping it the side so that my wife, who is left eye dominant, can also use it with her left eye. For best access to a centered dot when flipped over to the left, we needed to add a half-inch riser, but that places the dot perfectly for her left eye. Then I can easily flip it back for my use. I zeroed it while centered, and her shots impact only 2 inches to the right. That's just a training issue for her. There is no wobble in the mount in either position, so even though this isn't intended as a scope mount, it is working perfectly in that role for us. Buy with absolute confidence. I bought the VFZ mount since I have no need to be able to remove it...I just flip it over if it is in the way of my iron sights (which it is with the half-inch riser).
Login to rate this review.
8028
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 3 years ago
Pricey, but you get what you pay for. LaRue mounts are the choice of the seasoned veteran.
Login to rate this review.
8011
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 3 years ago
Works great with my Comp M3! Thanks for the goodies as well.
Login to rate this review.
7926
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 3 years ago
This mount worked perfect with my Primary Arms 3X magnifier. I couldn't have been more pleased with the customer service. The extra goodies that the mount came with were an added bonus. The QD mount locks on the rail extremely well. The flip to the side positively engages behind the red dot and off to the side. I couldn't be happier with the mount and customer service. Larue has made me a customer for life.
Login to rate this review.
7812
5
0 out of 0 people found this helpful.
Reviewed by Anonymous 3 years ago
Perfect! Works great with my aimpoint 3x magnifier behind my Aimpoint PRO. LaRue even threw in some extra goodies for free. THANKS!
Login to rate this review.

Post new Review

Please leave a star rating for your review.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Web page addresses and e-mail addresses turn into links automatically.

CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.