Trijicon RMR Type 2 LED and QD Mount Combo

 
$624.00
SKU: 590-062

Trijicon RMR Type 2 LED and QD Mount Combo

Developed to improve precision and accuracy with any style or caliber of weapon, the Trijicon RMR (Ruggedized Miniature Reflex) Type 2 is designed to be as durable as the legendary ACOG. This RMR is an LED sight powered by a standard CR2032 battery. Housed in rugged forged aluminum, the RMR Type 2 is extremely tough yet lightweight. New easy-to-use adjusters with audible clicks allow for quick windage and elevation adjustments. The new Trijicon RMR Type 2 is tougher than any alternative and suitable for military, law enforcement and hunting applications.

Magnification 1x
Bullet Drop Compensator No
Length (In) 45mm
Weight (oz) 1.2 oz w/ Battery
Illumination Source LED
Reticle Pattern 3.25 MOA Dot; 6.5 MOA Dot
Day Reticle Color Red
Night Reticle Color Red
Adjustment @ 100 yards (clicks/in) 1
Housing Material Forged Aluminum
Batteries 1 CR2032 Lithium Battery
Battery Life Up to 2 years of typical use*, up to 5 years in dark storage. *When used at 70ºF (21ºC). Extreme temperatures (high or low) will affect lithium battery performance.



The LT827 QD Mount
By popular demand, we developed this QD-mount for the Trijicon RMR-series of optics. It positions the optic at lower-1/3 cowitness when used with iron sights. The LT827 is designed specifically for use with standard AR15 flat top receivers. A slight cantilever allows positioning of the optic slightly forward of the front-edge of the receiver. Like all LaRue mounts, it is precision-machined out of bar-stock aluminum and matt black anodized to provide a durable non-reflective surface finish. The locking LaRue Speed Lever provides outstanding return to zero, the optic can be removed and replaced without loss of zero.

The LT837 QD Mount
We developed this Trijicon RMR QD-mount for the folks needing to get as low as possible (perfect for shotgunners). Like all LaRue mounts, it is precision-machined out of bar-stock aluminum and matt black anodized to provide a durable non-reflective surface finish. The locking LaRue Speed Lever provides outstanding return to zero, the optic can be removed and replaced without loss of zero. Comes complete with QD adjustment wrench and Instructions. Available with LaRue QD Speed Levers or VFZ mounts

The LT788 Mount
This mount allows the user to put a Trijicon RMR on the tube of a 34mm (or 30mm via included ring step downs) scope. The MRD can be mounted left or right, and the mount can be reversed to clear just about any structural obstacle on the scope. Optimal position is at 45-degrees, between turrets, but this mount allows the user to modify the position at any desired angle, and clamp it tight. Made of black anodized aluminum, with steel inserts.

The LT742 Ring Half
Converts your basic LaRue SPR mount to carry a Trijicon RMR backup sight. Works with any 30mm vertical ring riflescope mount LaRue makes. Simply replace one side of a set of rings with this upgrade and attach the RMR. The canted angle makes it easier to locate the dot, as it places the dot relatively close to the primary optic’s height over bore as you rotate the rifle. Reversible to work on either left or right side.

Post new Review

Please leave a star rating for your review.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Web page addresses and e-mail addresses turn into links automatically.

CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.