









Aimpoint Micro T-2 2MOA/M4 Mount Combo
link: https://www.larue.com/products/aimpoint-micro-t-2-2moa-m4-qd-mount-combo/
SKU: 500-031-751-k
$998.00
BACKORDERED UNTIL MID 2023
AIMPOINT MICRO T2
The new sight offers additional features and enhanced performance. Since its
introduction in 2007, the Aimpoint Micro sight has become the worldwide standard
for compact reflex sights. Law enforcement and military end users have embraced
this sight for its compact size, durability, and extremely long battery life.
Product reviews with professional end users identified a series of desired
product enhancements that have now been added to this new product. These changes
include: a new sight housing which allows the addition of front and rear
protective flip covers and anti-reflective devices, additional physical
protection for the sight’s adjustment turrets, increased durability added to the mount threading, and increased ruggedness for the
sight’s internal electronic components.
Combo comes with one of the following QD mount heights (select on
pull-down menu to the right)
Tall (LT660)
Allows a 1/3 cowitness with the Iron Sights on M4 Carbine and AR-15 Flattops.
Absolute (LT751)
Provides absolute cowitness with the Iron Sights on M4 Carbine and AR-15
Flattops..
Medium (LT660HK)
Provides Lower 1/3rd Co-witness with iron sights when using HK Height iron
sights.
Short (LT661)
QD Mount for Aimpoint Micro Sight. Gets the Micro down low to use on Shotguns,
PS90's and AK's
45 degree offset (LT787)
Can be mounted to the left or the right, at 45 degrees off of the scope tube.
BACKORDERED UNTIL MID 2023
AIMPOINT MICRO T2
The new sight offers additional features and enhanced performance. Since its introduction in 2007, the Aimpoint Micro sight has become the worldwide standard for compact reflex sights. Law enforcement and military end users have embraced this sight for its compact size, durability, and extremely long battery life. Product reviews with professional end users identified a series of desired product enhancements that have now been added to this new product. These changes include: a new sight housing which allows the addition of front and rear protective flip covers and anti-reflective devices, additional physical protection for the sight’s adjustment turrets, increased durability added to the mount threading, and increased ruggedness for the sight’s internal electronic components.
Combo comes with one of the following QD mount heights (select on pull-down menu to the right)
Tall (LT660)
Allows a 1/3 cowitness with the Iron Sights on M4 Carbine and AR-15 Flattops.
Absolute (LT751)
Provides absolute cowitness with the Iron Sights on M4 Carbine and AR-15 Flattops..
Medium (LT660HK)
Provides Lower 1/3rd Co-witness with iron sights when using HK Height iron sights.
Short (LT661)
QD Mount for Aimpoint Micro Sight. Gets the Micro down low to use on Shotguns, PS90's and AK's
45 degree offset (LT787)
Can be mounted to the left or the right, at 45 degrees off of the scope tube.
This is not a broken sight! The front lens is a little bit inclined due to the fact the diode is not located in the center of the sight but it might be located either in the roof part or the lower part of the sight depending on the model. The lens and the diode are in line with one and other.
The dot in my Aimpoint sight doesn't look round. Is it defective?
If your dot does not appear to be perfectly round, the distortion is probably caused by the way that your eye perceives the dot, rather than by some mechanical defect. Due to differences in the lenses in different individuals' eyes, round objects that subtend areas near 3 minutes of angle may appear distorted in a variety of ways depending on the individual and other environmental influences. Inexpensive red dot sights sometimes have manufacturing defects that can cause the dot to be an odd shape.
This effect is less pronounced in sights with larger dots. More people will see the dot in a sight with a 10 minute-of-angle dot as being perfectly round than will be able to see a 3 MOA dot as round.
About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.
Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).