Burris XTR II 5-25x50 Riflescope with SCR Mil/MOA Reticle (34mm) with LaRue QD Mount
link: https://www.larue.com/products/burris-xtr-ii-5-25x50-riflescope-with-scr-mil-moa-reticle-34mm-k/
SKU: 510-019-k
$1098.00
Burris XTR II 5-25x50 Riflescope with SCR Mil/MOA Reticle (34mm) with
LaRue QD Mount
This is serious, state-of-the-art technology for competitive shooters and
tactical operators. The XTR II 5-25x50 mm riflescope features a 5-times zoom
system and 25% thicker tube construction than the original XTR™ Riflescope. The
front focal plane reticle design on this and all high-magnification XTR II
riflescopes allows the reticle size to increase or decrease as magnification is
increased or decreased. Trajectory compensation is always correct and
proportional for the selected power setting. This reticle design is also called
first focal plane or FFP.
It has dimensionally-matched precision adjustment knobs and Zero Click Stop
technology. High-performance optics offer Hi-Lume® multi-coated lenses. The
lenses optimize target resolution, contrast, and low-light performance. All
hand-fitted internal assemblies are triple spring-tensioned for absolute
shockproofing, even under severe recoil. They are vibration resistant, even on
extended vehicular patrols. The riflescope outdelivers its modest price tag. And
it’s protected forever by the Burris Forever Warranty™ .
QD Mount
Available with the LaRue LT104 or LT111 (select in the pull-down menu to the
right). The LT104 positions the centerline of the optic 1.5” above the rail, and
cantilevers forward to span receiver and handguard junctions. The LT111
positions the centerline of the optic 1.535” above the rail to line-up perfectly
behind clip-on night vision devices. The wider stance of the LT111 provides
extra support for continuously-railed flat tops. The combo comes complete with
Scope, QD Mount with wrench, QD adjustment wrench and Instructions.
SCR Mil Reticle Model # 201051
The SCR Mil reticle is ideal for precision competition use. With its extended
illumination area, you can engage targets at long distances even in low light.
•1/2-mil holdover lines
•2/10-mil and 1-mil windage hold-off lines for precision
•1/10-mil ranging brackets on the crosshairs, at the top, left, and right
extremes
•Mil-based, proprietary Burris design
•SCR stands for special competition reticle
•Extended center illumination area lets you engage targets at long distances in
low light and shadows
•Front focal plane design means trajectory compensation and wind hold-off
references are accurate at any magnification
•Increases speed and precision for wind hold-off and for range estimation and
impact measurement
SCR MOA Reticle Model # 201052
The SCR MOA reticle increases precision for long-range competition. Its extended
illuminated center area lets you confidently engage targets in low light and
shadows.
•MOA-based, proprietary Burris design increases precision for long-range
competition without adding clutter or distraction
•Design increases speed and precision for wind hold-off, range estimation, and
impact measurement
•1-MOA holdover lines
•1/2-MOA and 1-MOA windage hold-off lines for precision
•1/4-MOA ranging brackets on the crosshairs, at the top, left, and right
extremes
•Proprietary reticle
•Extended illumination area lets you engage targets at long distance even in low
light
•SCR stands for special competition reticle
•Front focal plane design means trajectory compensation and wind hold-off
references are accurate at any magnification
Specifications:
- Tube Diameter: 34mm
- Adjustable Click Value: 1/10 mil; 100-Click Knob
- Finger Adjustable Turrets
- Lens Coating: Multi-Coated
- Warranty: Burris Forever Warranty
- Lens Covers Included
- Reticle: SCR-Mil or SCR-MOA
- Finish: Matte
- Water/Fogproof
- Shockproof
Burris XTR II 5-25x50 Riflescope with SCR Mil/MOA Reticle (34mm) with LaRue QD Mount
This is serious, state-of-the-art technology for competitive shooters and tactical operators. The XTR II 5-25x50 mm riflescope features a 5-times zoom system and 25% thicker tube construction than the original XTR™ Riflescope. The front focal plane reticle design on this and all high-magnification XTR II riflescopes allows the reticle size to increase or decrease as magnification is increased or decreased. Trajectory compensation is always correct and proportional for the selected power setting. This reticle design is also called first focal plane or FFP.
It has dimensionally-matched precision adjustment knobs and Zero Click Stop technology. High-performance optics offer Hi-Lume® multi-coated lenses. The lenses optimize target resolution, contrast, and low-light performance. All hand-fitted internal assemblies are triple spring-tensioned for absolute shockproofing, even under severe recoil. They are vibration resistant, even on extended vehicular patrols. The riflescope outdelivers its modest price tag. And it’s protected forever by the Burris Forever Warranty™ .
QD Mount
Available with the LaRue LT104 or LT111 (select in the pull-down menu to the right). The LT104 positions the centerline of the optic 1.5” above the rail, and cantilevers forward to span receiver and handguard junctions. The LT111 positions the centerline of the optic 1.535” above the rail to line-up perfectly behind clip-on night vision devices. The wider stance of the LT111 provides extra support for continuously-railed flat tops. The combo comes complete with Scope, QD Mount with wrench, QD adjustment wrench and Instructions.
SCR Mil Reticle Model # 201051
The SCR Mil reticle is ideal for precision competition use. With its extended illumination area, you can engage targets at long distances even in low light.
•1/2-mil holdover lines
•2/10-mil and 1-mil windage hold-off lines for precision
•1/10-mil ranging brackets on the crosshairs, at the top, left, and right extremes
•Mil-based, proprietary Burris design
•SCR stands for special competition reticle
•Extended center illumination area lets you engage targets at long distances in low light and shadows
•Front focal plane design means trajectory compensation and wind hold-off references are accurate at any magnification
•Increases speed and precision for wind hold-off and for range estimation and impact measurement
SCR MOA Reticle Model # 201052
The SCR MOA reticle increases precision for long-range competition. Its extended illuminated center area lets you confidently engage targets in low light and shadows.
•MOA-based, proprietary Burris design increases precision for long-range competition without adding clutter or distraction
•Design increases speed and precision for wind hold-off, range estimation, and impact measurement
•1-MOA holdover lines
•1/2-MOA and 1-MOA windage hold-off lines for precision
•1/4-MOA ranging brackets on the crosshairs, at the top, left, and right extremes
•Proprietary reticle
•Extended illumination area lets you engage targets at long distance even in low light
•SCR stands for special competition reticle
•Front focal plane design means trajectory compensation and wind hold-off references are accurate at any magnification
Specifications:
- Tube Diameter: 34mm
- Adjustable Click Value: 1/10 mil; 100-Click Knob
- Finger Adjustable Turrets
- Lens Coating: Multi-Coated
- Warranty: Burris Forever Warranty
- Lens Covers Included
- Reticle: SCR-Mil or SCR-MOA
- Finish: Matte
- Water/Fogproof
- Shockproof
About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.
Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).