LaRue Tactical 20 Inch PredatOBR 6.5 Creedmoor
link: https://www.larue.com/products/larue-tactical-20-inch-predatobr-6-5-creedmoor/
SKU: LTH65C-20-K
$4125.00
LaRue Tactical 20" PredatOBR 6.5 Creedmoor
The PredatOBR 6.5 Creedmoor is the ultimate lightweight long distance rifle. The
most remarkable feature of the PredatOBR is its ability to be completely “broken
down” and stored into the optional Rollup Bag and Toolbox. The PredatOBR
handguard has a locking stainless steel QD Lever system on each side. Once the
levers are released, the handguard slides off of the upper assembly in seconds.
The PredatOBR's barrel can easily be removed with the supplied PredatOBR Barrel
Wrench, unscrew the Barrel Nut from Receiver and pull the Barrel Assembly free
from Receiver. No need to remove the gas tube, gas block or muzzle device.
Reverse the process to reinstall. Hand-tighten Barrel Nut and torque
approximately 1/8-turn past hand-tight (Approximately 40-50 foot pounds). Once
reassembled correctly, the point of impact (POI) shift will be 0.0 to 0.5 MOA of
the original.
Barrels are chambered in 6.5 Creedmoor, and feature rifling in a 1/7.5 twist rate.
All barrels are threaded in 5/8 x 24. Like the OBR and PredatAR riles, LaRue has
eliminated the conventional AR barrel nut and bolt the handguard directly to the
proprietary upper receiver, creating a true “free-float” barrel. The handguard
does not touch the barrel or barrel nut at any place. The zero-MOA upper rail
provides plenty of room for weapon-mounted night-vision day/night combinations.
Both the upper and lower are CNC-machined from billet aluminum for the optimum
fit and consistency. Even though it has been lightened certain features, there
is still additional material in strategic areas to achieve maximum accuracy.
The PredatOBR has threaded stainless-steel hard-points over the entire length of
the handguard at the 3, 6, and 9 o’clock positions. These hard-points have an
integral spine built-in for structural support. Provided with the system are
three 3-inch MIL-STD-1913 rail sections that can be positioned anywhere along
the handguard, per operator preference. These rail sections are
attachable/detachable using a supplied tool (Torx® T-15 wrench). The rail
sections are CNC-machined from billet aluminum. This robust solution provides a
perfect precision mounting space for aiming lasers, illumination and bipods.
The LaRue Tactical 6-position Retract Action Trigger (R.A.T.) Stock comes
standard with every PredatOBR. It is ergonomic, has protected control surfaces
and contains a set of cleaning rods in an internal compartment. Since the height
of the 12 o’clock rail is at the optimum position, there is no need for a cheek
riser as part of this system.
Specifications:
Caliber: 6.5 Creedmoor
Barrel Length: 20"
Rifling Twist Rate: 1/7.5
Barrel Life: 10,000 (approx)
Trigger: LaRue MBT
Accessories:
2ea, 20-Round LaRue Magazines
3ea 3” Rail Sections
Operators Manual
Barrel Wrench
About LaRue Firearm Accuracy:
LaRue accuracy is known world-wide. The accuracy of each LaRue Rifle is proven
at our 100-yard tunnel using match-grade ammunition. No LaRue firearm can leave
the facility unless it obtains accuracy of less-than 1 MOA (1.047”) at 100
Yards. Each firearm ships with a copy of a 3-round group obtained from that
actual firearm. While we guarantee the rifle is capable of sub-MOA accuracy, we
can not guarantee the end-user will be able to shoot sub-MOA…since we have no
control over shooting proficiency, familiarity with the system, ammunition
choice, environmental factors, etc. LaRue firearms are precision instruments
that require discipline, training, proper ammunition and maintenance to yield
the best results.
LaRue Tactical 20" PredatOBR 6.5 Creedmoor
The PredatOBR 6.5 Creedmoor is the ultimate lightweight long distance rifle. The most remarkable feature of the PredatOBR is its ability to be completely “broken down” and stored into the optional Rollup Bag and Toolbox. The PredatOBR handguard has a locking stainless steel QD Lever system on each side. Once the levers are released, the handguard slides off of the upper assembly in seconds. The PredatOBR's barrel can easily be removed with the supplied PredatOBR Barrel Wrench, unscrew the Barrel Nut from Receiver and pull the Barrel Assembly free from Receiver. No need to remove the gas tube, gas block or muzzle device. Reverse the process to reinstall. Hand-tighten Barrel Nut and torque approximately 1/8-turn past hand-tight (Approximately 40-50 foot pounds). Once reassembled correctly, the point of impact (POI) shift will be 0.0 to 0.5 MOA of the original.
Barrels are chambered in 6.5 Creedmoor, and feature rifling in a 1/7.5 twist rate. All barrels are threaded in 5/8 x 24. Like the OBR and PredatAR riles, LaRue has eliminated the conventional AR barrel nut and bolt the handguard directly to the proprietary upper receiver, creating a true “free-float” barrel. The handguard does not touch the barrel or barrel nut at any place. The zero-MOA upper rail provides plenty of room for weapon-mounted night-vision day/night combinations. Both the upper and lower are CNC-machined from billet aluminum for the optimum fit and consistency. Even though it has been lightened certain features, there is still additional material in strategic areas to achieve maximum accuracy.
The PredatOBR has threaded stainless-steel hard-points over the entire length of the handguard at the 3, 6, and 9 o’clock positions. These hard-points have an integral spine built-in for structural support. Provided with the system are three 3-inch MIL-STD-1913 rail sections that can be positioned anywhere along the handguard, per operator preference. These rail sections are attachable/detachable using a supplied tool (Torx® T-15 wrench). The rail sections are CNC-machined from billet aluminum. This robust solution provides a perfect precision mounting space for aiming lasers, illumination and bipods.
The LaRue Tactical 6-position Retract Action Trigger (R.A.T.) Stock comes standard with every PredatOBR. It is ergonomic, has protected control surfaces and contains a set of cleaning rods in an internal compartment. Since the height of the 12 o’clock rail is at the optimum position, there is no need for a cheek riser as part of this system.
Specifications:
Caliber: 6.5 Creedmoor
Barrel Length: 20"
Rifling Twist Rate: 1/7.5
Barrel Life: 10,000 (approx)
Trigger: LaRue MBT
Accessories:
2ea, 20-Round LaRue Magazines
3ea 3” Rail Sections
Operators Manual
Barrel Wrench
About LaRue Firearm Accuracy:
LaRue accuracy is known world-wide. The accuracy of each LaRue Rifle is proven at our 100-yard tunnel using match-grade ammunition. No LaRue firearm can leave the facility unless it obtains accuracy of less-than 1 MOA (1.047”) at 100 Yards. Each firearm ships with a copy of a 3-round group obtained from that actual firearm. While we guarantee the rifle is capable of sub-MOA accuracy, we can not guarantee the end-user will be able to shoot sub-MOA…since we have no control over shooting proficiency, familiarity with the system, ammunition choice, environmental factors, etc. LaRue firearms are precision instruments that require discipline, training, proper ammunition and maintenance to yield the best results.