LaRue Tactical Aimpoint Micro Mount LT660, LT660HK or LT661
link: https://www.larue.com/products/larue-tactical-aimpoint-micro-mount-lt660-lt660hk-or-lt661/
SKU: LT660-c
$131.00
LaRue Tactical Aimpoint Micro QD Mounts
One of our most popular series of mounts. Our LT660 (for the T-1/T-2 and H-1/H-2) come
in three different heights, as listed below. We also offer the LT751 in an
absolute cowitness height. Like all LaRue mounts, they are precision-machined
out of bar-stock aluminum and matt black anodized to provide a durable non-reflective surface finish. The locking LaRue
Speed Lever provides outstanding return to zero; the optic can be removed, and
replaced, without loss of zero. Guaranteed.
Each mount comes complete with replacement mounting screws with wrench, QD
adjustment wrench, vial of blue Locktite and Instructions.
Sizes:
1/3 Co-Witness (LT660)
Allows a 1/3 co-witness with the Iron Sights on M4 Carbine and AR-15 Flattop.
Lower 1/3 Co-Witness (LT660HK)
Provides Lower 1/3rd Co-witness with iron sights when using HK Height iron
sights
This will NOT give you absolute co-witness with iron
sights if used on a regular AR-15.
Short Shotgun, PS90 & AK (LT661)
QD Mount for Aimpoint Micro Sight. Gets the Micro down low to use on Shotguns,
PS90's and AK's
LaRue Tactical Aimpoint Micro QD Mounts
One of our most popular series of mounts. Our LT660 (for the T-1/T-2 and H-1/H-2) come in three different heights, as listed below. We also offer the LT751 in an absolute cowitness height. Like all LaRue mounts, they are precision-machined out of bar-stock aluminum and matt black anodized to provide a durable non-reflective surface finish. The locking LaRue Speed Lever provides outstanding return to zero; the optic can be removed, and replaced, without loss of zero. Guaranteed.
Each mount comes complete with replacement mounting screws with wrench, QD adjustment wrench, vial of blue Locktite and Instructions.
Sizes:
1/3 Co-Witness (LT660)
Allows a 1/3 co-witness with the Iron Sights on M4 Carbine and AR-15 Flattop.
Lower 1/3 Co-Witness (LT660HK)
Provides Lower 1/3rd Co-witness with iron sights when using HK Height iron sights
This will NOT give you absolute co-witness with iron sights if used on a regular AR-15.
Short Shotgun, PS90 & AK (LT661)
QD Mount for Aimpoint Micro Sight. Gets the Micro down low to use on Shotguns, PS90's and AK's
About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.
Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).