









LaRue Tactical Comp M2 Mount LT150
link: https://www.larue.com/products/larue-tactical-comp-m2-mount-lt150/
SKU: LT150-c
$199.00
The standard QD mount for the Aimpoint Comp M2 & M3.
The correct 1/3-cowitness height-above-rail was trial & errored by
"folks-in-the-know". Of course it comes in 30mm. The robust base has a built-in
watertight storage compartment for an extra battery.
The LT150 positions the centerline of the optic 1.7" above the top of the rail.
Like all LaRue mounts, it is precision-machined out of bar-stock aluminum and
matte black anodized to provide a durable non-reflective surface finish. The locking LaRue Speed Lever provides outstanding
return to zero; the optic can be removed, and replaced, without loss of zero.
Guaranteed.
Comes complete with QD adjustment wrench, spare ring screw, and Instructions.
About VFZ Mounts:
VFZ is a new theory in the concept of clamping accessories to MIL-STD-1913
rails. Instead of using a horizontal cross-bolt, the VFZ uses a vertical bolt
that draws up a clamping foot against the lower angle of the rail, seating the
mount similarly to a fully-closed LaRue lever.
Once installed on the firearm, index marks allow the user to remove the mount,
then reattach to the same tension, providing unprecedented return to zero for a
non-QD-levered mount. The unique vertical alignment of the clamp allows
components that are structurally stronger than traditional cross-bolt designs.
The standard QD mount for the Aimpoint Comp M2 & M3.
The correct 1/3-cowitness height-above-rail was trial & errored by "folks-in-the-know". Of course it comes in 30mm. The robust base has a built-in watertight storage compartment for an extra battery.
The LT150 positions the centerline of the optic 1.7" above the top of the rail.
Like all LaRue mounts, it is precision-machined out of bar-stock aluminum and matte black anodized to provide a durable non-reflective surface finish. The locking LaRue Speed Lever provides outstanding return to zero; the optic can be removed, and replaced, without loss of zero. Guaranteed.
Comes complete with QD adjustment wrench, spare ring screw, and Instructions.
About VFZ Mounts:
VFZ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever.
Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.
About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.
Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).