LaRue Tactical Polymer Combo Package
LaRue Tactical Polymer Combo Package
Buy everything together and save. This includes everything you need to dress-out your rifle with a LaRue polymer furniture. The kit includes our adjustable RAT™ Stock, RAT™ Rod Kit, A-PEG™grip, 72-piece IndexClip™ set, and 2 HandStops™. The grip is available in AR10 and AR15 models, in both rough and smooth texture. The colors available are shown on the pulldown menu to the right.
If purchased separately, all of these components would cost $211.00, when purchased as a combo package they are $195.00.
Colors: Black, FDE, OD, FOL, UDE
-More about the items-
LaRue Tactical RAT™ Stock Link
With simplicity in mind, the new LaRue RAT™ Stock was designed to be the ideal complement to the LaRue Tactical AR15 family of rifles. The unique 2-stage trigger mechanism allows shooters to adjust the pull length of the stock while in a variety of shooting positions. The CNC-machined internals allow for smooth operation as trigger mechanism is pulled to the rear and released. The internals provide positive lockup on Mil-Spec receiver extension positions. The internal cavity is designed for a snug fit without the need for an additional locking mechanism. Ambidextrous 1/4” swivel sockets, and 1” slots provide ideal anchor points for two-point slings. A locking rear butt-plate slides open to expose compartments that hold cleaning kit components.
LaRue Tactical RAT™ Rod Kit Link
This emergency cleaning rod kit fits snugly in the RAT Stock for when you need to run a patch or clear a stuck case in the chamber. Fully-assembled, the rod is 24” and screws into buttpad for ease of use.
LaRue Tactical A-PEG™ Link
Initially designed with the precision shooter in mind, the folks at LaRue Tactical queried trusted individuals in the precision shooting community what they would prefer in a grip. The result is the LaRue A-PEG™. The project grew into an accessory that featured ambidextrous geometry that can be used by all shooters, enchaining control of AR15-type weapons. The A-PEG™ is available in two sizes; Regular (for 5.56 receivers) and Extended (for 7.62 receivers). The Extended version fills the “gap” in AR10-platform receivers. Inspired by the human hand, the unique “flats” on the front and back fall more naturally onto the geometry of the hand’s structure. The flat front also provides indexing to help level and square the firearm to the target. A sculptured palm swell on either side fits nicely into the hollows of the palm. A gentle taper helps seat the hand towards the firearm, and helps to keep the hand from sliding. The generous texture added to the sides gives just the right amount of traction in slippery conditions. Having an A2 footprint, the A-PEG™ will attach to almost any firearm that has an AR15-type grip interface. Comes complete with mounting hardware. Regular (for 5.56 receivers) and Extended (for 7.62 receivers), smooth or rough textured.
Length: 4.0” (Extended version is 4.25”)
Length added to firearm: 3.1”
We introduced these slide-on HandStops in the Fall of 2008, and have been refining them ever since. We ended up with a simple, robust and economical solution. The one-piece design has no moving parts to break, or seams to rub against. Once installed in position (they fit snugly anywhere on the rail), these devices add structure optimally to the hand, providing better support, recoil management and overall control of the rifle. Giving the rail physical obstructions also keep the support-hand intuitively in proper position, and away from dangerous SBR muzzles and hot barrels. Installation is as simple as sliding in place, and locking in position with two IndexClips.
These handy low-profile clips were designed to be attached on the rail, against optics, lasers and other MIL-STD-1913 mounted accessories, providing a quick-index to return to the same point...especially in the dark. Each set comes complete with 72 total clips, 60 regular and 12, designed to hold tapeswitch wires along the rail's edge. LaRue IndexClips are easy to install, and stay-put until pried off (a Dillo's foot works really well for this). Several clips in a row can be used to protect a length of rail, and feature a non-slip surface.
For customers in NJ, NY, MA or CT
LaRue Tactical has had a company policy that we would not sell collapsible stocks to residents of these states as these states did not allow for the installation of these items to rifles unless they were “pre-ban” or met some kind of feature or criteria test. We have had customers say that they were going to purchase a collapsible stock from us and then have a local gunsmith or dealer pin the stock to meet individual states legal requirement and we, as a matter of our company policy, still refused to sell them these items to prevent any issues with legality for either the customer or for us.
As of today, we will be reversing our policy regarding the sale of collapsible stocks to NJ, NY, MA or CT and we will sell a resident of one of these states a stock. LaRue Tactical advises that you check with your local or state law enforcement to determine whether a particular item is or is not legal in your jurisdiction. It is the responsibility of the customer to know the laws regarding ownership of these items in their state/locality, LaRue Tactical will not provide advice to customers on the legality of owning these parts or on how these parts can be made state compliant.