US Optics 1.8-10x42mm FDN 10x and LaRue Mount
link: https://www.larue.com/products/us-optics-1-8-10x42mm-fdn-10x-and-larue-mount/
SKU: 515-017-k
$2374.05
US Optics 1.8-10x42mm FDN 10x and LaRue Mount
If you’re looking for a scope that is highly effective at both extremes of its
magnification range, all while maintaining revered optical clarity, you’ve found
it. The FDN 10X 1.8-10X features a 42mm objective, 6061-T6 aluminum 34mm tube,
low-profile ER3K elevation knob with a zero stop, ergonomic capped US#1 windage
knob, integrated illumination and parallax knob, rapid adjustable 180°
magnification throw, and customization options that will undoubtedly meet your
needs. Make your next build stand out from the rest with the FDN 10X.
GAP MIL Scale Reticle
Designed in conjunction with George from GA Precision, this MIL based reticle
offers full MIL as well as ½MIL increments. A total of 9 MIL’s from the center
down on the vertical axis, and 4 MIL’s left and right of center on the
horizontal axis.
Horus H425 Reticle
The Horus Vision H425 is designed for ease of use to meet the needs of the
hunter and marksman. As part of the MR-10 series of rifle scopes the H425
reticle includes an inverted “L” range finder in the lower left quadrant that is
calibrated in shooters minute of angle (SMOA) or inch per hundred yards (IPHY)
for quick and precise calculation of range and distances. The H425 grid has 8
horizontal stadia lines which represent 8 Mils of elevation hold. The grid lines
allow the shooter to correct for elevation and windage without turning knobs or
counting clicks. The smaller, secondary horizontal lines allow for precise
elevation holds with standard spacing between each secondary horizontal line set
at 1 mil to compensate for wind, drift, speed of target, etc.
Specifications
Weight: 27.8 oz
Length: 12.98 in
Tube: 34 mm
Objective Lens Diameter: 40 mm
Ocular Lens Diameter: 35 mm
US Optics 1.8-10x42mm FDN 10x and LaRue Mount
If you’re looking for a scope that is highly effective at both extremes of its magnification range, all while maintaining revered optical clarity, you’ve found it. The FDN 10X 1.8-10X features a 42mm objective, 6061-T6 aluminum 34mm tube, low-profile ER3K elevation knob with a zero stop, ergonomic capped US#1 windage knob, integrated illumination and parallax knob, rapid adjustable 180° magnification throw, and customization options that will undoubtedly meet your needs. Make your next build stand out from the rest with the FDN 10X.
GAP MIL Scale Reticle
Designed in conjunction with George from GA Precision, this MIL based reticle offers full MIL as well as ½MIL increments. A total of 9 MIL’s from the center down on the vertical axis, and 4 MIL’s left and right of center on the horizontal axis.
Horus H425 Reticle
The Horus Vision H425 is designed for ease of use to meet the needs of the hunter and marksman. As part of the MR-10 series of rifle scopes the H425 reticle includes an inverted “L” range finder in the lower left quadrant that is calibrated in shooters minute of angle (SMOA) or inch per hundred yards (IPHY) for quick and precise calculation of range and distances. The H425 grid has 8 horizontal stadia lines which represent 8 Mils of elevation hold. The grid lines allow the shooter to correct for elevation and windage without turning knobs or counting clicks. The smaller, secondary horizontal lines allow for precise elevation holds with standard spacing between each secondary horizontal line set at 1 mil to compensate for wind, drift, speed of target, etc.
Specifications
Weight: 27.8 oz
Length: 12.98 in
Tube: 34 mm
Objective Lens Diameter: 40 mm
Ocular Lens Diameter: 35 mm
About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.
Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).