US Optics 3.2-17x50mm FDN 17x and LaRue Mount
link: https://www.larue.com/products/us-optics-3-2-17x50mm-b-17-and-larue-mount/
SKU: 515-019-k
$2279.97
US Optics 3.2-17x50mm FDN 17x and LaRue Mount
Designed and engineered with precision shooters in mind, the FDN 17X makes
taking shots out to 1500 yards nearly effortless. It’s wide magnification range,
optical clarity, and feature set make the FDN 17X a multipurpose optic for use
across many shooting applications. The FDN 17X 3.2-17X features a 50mm
objective, 6061-T6 aluminum 34mm tube, low-profile ER3K elevation knob with a
zero stop, ergonomic capped US#1 windage knob, integrated illumination and
parallax knob, rapid adjustable 180° magnification throw, and customization
options that will undoubtedly meet your needs.
Horus H102 Reticle
The Horus Vision H102 in the LR-17 was designed for the entry-level rifleman,
designated marksman or sniper. Features include but are not limited to targeting
ovals, leads for moving targets and a range finder. The grid pattern represents
a total of 27 MILs of adjustment below the horizontal axis; 30.5 MILs of
adjustment above the horizontal axis and 30.5 MILs of adjustment to the left and
right of the vertical axis. The H102 also allows for wind correction as well as
leading targets moving up to 60 miles per hour.
Horus TReMoR3 Reticle
Based on the Tremor2 reticle, Horus Vision has added Rapid Range Bars above the
main horizontal stadia, more holdover dots for an expanded uncluttered grid, and
extra Speed-Shooting Guides along the 1-mil horizontal stadia. The Tremor™3
reticle also features Moving Target Holds and wind guides found in the Tremor2
Specifications
Weight: 29.8 oz
Length: 15.02 in
Tube: 34 mm
Objective Lens Diameter: 50 mm
Ocular Lens Diameter: 35 mm
US Optics 3.2-17x50mm FDN 17x and LaRue Mount
Designed and engineered with precision shooters in mind, the FDN 17X makes taking shots out to 1500 yards nearly effortless. It’s wide magnification range, optical clarity, and feature set make the FDN 17X a multipurpose optic for use across many shooting applications. The FDN 17X 3.2-17X features a 50mm objective, 6061-T6 aluminum 34mm tube, low-profile ER3K elevation knob with a zero stop, ergonomic capped US#1 windage knob, integrated illumination and parallax knob, rapid adjustable 180° magnification throw, and customization options that will undoubtedly meet your needs.
Horus H102 Reticle
The Horus Vision H102 in the LR-17 was designed for the entry-level rifleman, designated marksman or sniper. Features include but are not limited to targeting ovals, leads for moving targets and a range finder. The grid pattern represents a total of 27 MILs of adjustment below the horizontal axis; 30.5 MILs of adjustment above the horizontal axis and 30.5 MILs of adjustment to the left and right of the vertical axis. The H102 also allows for wind correction as well as leading targets moving up to 60 miles per hour.
Horus TReMoR3 Reticle
Based on the Tremor2 reticle, Horus Vision has added Rapid Range Bars above the main horizontal stadia, more holdover dots for an expanded uncluttered grid, and extra Speed-Shooting Guides along the 1-mil horizontal stadia. The Tremor™3 reticle also features Moving Target Holds and wind guides found in the Tremor2
Specifications
Weight: 29.8 oz
Length: 15.02 in
Tube: 34 mm
Objective Lens Diameter: 50 mm
Ocular Lens Diameter: 35 mm
About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.
Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).