LaRue Tactical 2-Piece QD LT808

Name: LaRue Tactical 2-Piece QD LT808
Brand: Larue
Price: 160.0 USD

link: https://www.larue.com/products/larue-tactical-2-piece-qd-lt808/

SKU: LT808

$210.00

LaRue Tactical 30&34MM 2-Piece QD LT808

The LT808 rings position the centerline of the optic 1.375" above the top of the rail.are and attach to any MIL-STD-1913 Picatinny rail. LaRue Speed Levers provide outstanding return to zero, the optic can be removed and replaced without worry. The LT808 is .095” higher than the LT123.

Comes complete with QD adjustment wrench, spare ring screw, and Instructions.

LaRue Tactical 2-Piece QD LT808

Reviews New Review

$210.00

SKU: LT808

Ring Size This field is required

Mounting Type This field is required

Quantity This field is required

Description
FAQ
Reviews ( 16 )
Instructions

Reviewed by Anonymous on 3 months, 1 week ago

I own over 10 sets of LaRue rings- 1 and 2 piece mounts both quick connect and standard. I use these for AI stocks as the scope sits so low you need a high ring set. For the standard Remington 700 and Savage LRP, I use the low set or the Remington set with the Rail, ultra low rings and cheek pad. I use one piece for my Colt M4 and Sig AR-10. LaRue is the shit- plain and simple. Any decent rings (Vortex, Nightforce, Leupold Steel, etc.) are gonna cost but none have the quick connect and return to zero. I swap my Vortex Gen 2's between 300 WM and the other between my .284 and 6.5X47. Just count the clicks and I am good to go when switching- they aint cheap but buy once, cry once.

Reviewed by Anonymous on 2 years ago

I must say, options for 34mm rings is where LaRue is lacking. I gave these rings a shot because they are the only 34mm rings in a non one-piece mount. Unlike 30mm rings that come in various heights, the 34mm rings only come in one height. The height didn't work out on my bolt gun so I had to go elsewhere. I'll always use LaRue for their LT104's, but the lack of height options on the 34mm rings will keep me going elsewhere for future rings.

About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.

Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).

Average Customer Rating: 4.75 out of 5

Reviewed by Anonymous on 3 months, 1 week ago